This one-year full-time course is integrated with a further four-year undergraduate degree, and will equip you with the knowledge, skills and attributes needed to successfully meet the challenges of our BEng Biomedical Engineering (Mechanics and Materials) degree. It is aimed at students who are highly motivated but did not choose the A level subjects required for direct entry to their chosen degree, are studying a BTEC, are an international or a mature student. Successful completion of this Foundation Year guarantees progression to one of seventeen subject areas, including Biomedical Engineering (Mechanics and Materials). You will study full time through a combination of lectures, workshops, tutorials, and independent study, with three hours of laboratory practical work each week. The Industrial Placement Year is an additional year-long module that allows you to apply for a paid placement with an engineering-based organisation. The Industrial Placement Year will extend your time at university to four years. During your placement, you will be able to apply the knowledge and skills that you've developed during the early years of your degree, and gain vital experience to help you become a professional engineer after graduation.
A Level: ABB | ABB* *If you have not taken the A-Level subjects required for first year entry to your chosen course, then you will usually need a Foundation Year. If you have studied all the subjects required for first year entry to your chosen course, then you will not normally be eligible for the Foundation Year. For example, if you want to study BEng Mechanical Engineering, you must not have already studied or be studying A-levels in both maths and physics. If you are studying maths but not physics or if you are studying physics but not maths, then you would normally be eligible to study BEng Mechanical Engineering with Integrated Foundation Year. If you are studying three other subjects (i.e. not maths or physics) e.g. sociology, biology and geography, then you would normally be eligible to study BEng Mechanical Engineering with Integrated Foundation Year. For further information please to refer our webpage, which lists the subject combinations that are not acceptable for entry to our Foundation Year. If you still need any help determining your eligibility for this course, please contact our Admissions Team. | T Level: D | A Distinction, including a Core A grade, in either of the following T-levels: Digital Production, Design and Development or Design, Surveying and Planning for Construction | Scottish Higher | We normally consider applicants who offer at least 1 Advanced Higher. Applicants presenting with only Highers will be considered on a case-by-case basis. Where Highers are taken over two years it might be expected that higher grades are achieved, particularly in any specific subjects required. For example, S5 – S6 (2 years): AABBB (A in specific subject) or S6 (1 year): ABBBB (A in specific subject). Unless a more advanced level (Higher or Advanced Higher) is specified in the stated entry requirements, all applicants will be required to have achieved a pass in Mathematics and English at Standard Grade, Grade 3 or National 5, Grade C, the equivalent of GCSE Grade C/ Grade 4. We are committed to ensuring that all learners with the potential to succeed, regardless of their background, are encouraged to apply to study with us. The additional information gained through contextual data allows us to recognise a learner's potential to succeed in the context of their background and experience. Applicants who are highlighted in this way will be made an offer which is lower than the typical offer for that programme. | Access to HE Diploma: 30 UCAS points | Access to HE Diploma: 15 UCAS points | Access to HE Diploma | 60 credits with a minimum of 45 credits at Level 3 of which at least 30 credits, including all credits from graded maths modules, must be graded Distinction and the remainder must be graded Merit. We accept Engineering, Computer Science or Science Level 3 Access courses only. Applicants should offer at least one maths module. | GCSE/National 4/National 5 Applicants must hold GCSE English language (or GCSE English) (minimum grade 4/C) and mathematics (minimum grade 6/B) | Scottish Advanced Higher | Offers will be based on exams being taken at the end of S6. Subjects taken and qualifications achieved in S5 will be reviewed. Careful consideration will be given to an individual’s academic achievement, taking in to account the context and circumstances of their pre-university education. Please see the University of Southampton’s Curriculum for Excellence Scotland Statement for further information. Applicants are advised to contact their Faculty Admissions Office for more information. | Pearson BTEC Level 3 National Diploma (first teaching from September 2016): DD | A typical offer is DD in the BTEC National Diploma plus B in an A-level subject*. Additionally, applicants are required to achieve a Distinction in Calculus to Solve Engineering Problems and Further Engineering Mathematics, where these modules have been studied. If you are not sure if your qualifications meet the requirements of this course, please contact our Admissions Team. *To be eligible for the Foundation Year, you must not have studied the A-Level subjects required for first year entry to your chosen course. Please refer to our website for full details. For example, if you want to study BSc Computer Science, you must not have already studied or be studying an A-level in maths. | OCR Cambridge Technical Diploma: DD | Typical entry criteria will be to achieve grade B in one A level subject (excluding Maths) plus Cambridge Technical Diploma in Engineering (Level 3) with an overall double grade of Distinction, Distinction. All applicants will be required to have achieved a Distinction in Mathematics for Engineering. Additionally, a Distinction is required in Applied Mathematics for Engineering where applicants have studied this unit. | International Baccalaureate Diploma Programme: 32 UCAS points | A typical offer for the IB is Pass with 32 points overall, with 16 points required at Higher Level including a minimum of 5 points in Standard Level Mathematics: Analysis and Approaches or Applications and Interpretation. Where Higher Level Mathematics has been studied as part of the diploma, we will require a minimum of 5 points. To be eligible for the Foundation Year, you must not have studied all the Higher-Level IB subjects required for first year entry to your chosen course. Please refer to our website for full details. For example, if you want to study BSc Computer Science, you must not have already studied or be studying Higher Level Mathematics: Analysis and Approaches or Applications and Interpretation. | Pearson BTEC Level 3 National Extended Diploma (first teaching from September 2016): DDD | For the BTEC National Extended Diploma, the subject must be one of: • Aeronautical Engineering • Engineering • Mechanical Engineering • Electrical/ Electronic Engineering • Manufacturing Engineering • Civil Engineering All applicants will be required to have achieved a Distinction in Calculus to Solve Engineering Problems. Additionally, a Distinction is required in Further Engineering Mathematics where applicants have studied this unit. We do not accept any other BTEC subjects. | Leaving Certificate - Higher Level (Ireland) (first awarded in 2017): H1H2H2H2H3H3 | A typical offer is H1, H2, H2, H2, H3, H3 If you have not taken the subjects required for direct entry to your chosen course e.g. maths, applied maths and physics, then you will usually need a Foundation Year. Please refer to our website for details about subject restrictions. | OCR Cambridge Technical Extended Diploma: DDD | Typical entry criteria will be to achieve Cambridge Technical Extended Diploma in Engineering (Level 3) with an overall triple grade of Distinction, Distinction, Distinction. All applicants will be required to have achieved a Distinction in Mathematics for Engineering. Additionally, a Distinction is required in Applied Mathematics for Engineering where applicants have studied this unit. | Pearson BTEC Level 3 National Extended Certificate (first teaching from September 2016): D | A typical offer is D in the BTEC National Extended Certificate plus AB in two A-levels*. *If you have not taken the A-Level subjects required for first year entry to your chosen course, then you will usually need a Foundation Year. For example, if you want to study BEng Mechanical Engineering, you must not have already studied or be studying A-levels in both maths and physics. If you are studying maths but not physics or if you are studying physics but not maths, then you would normally be eligible to study BEng Mechanical Engineering with Integrated Foundation Year. If you are studying three other subjects (i.e. not maths or physics) e.g. sociology, biology and geography, then you would normally be eligible to study BEng Mechanical Engineering with Integrated Foundation Year. For further information please to refer our webpage, which lists the subject combinations that are not acceptable for entry to our Foundation Year. If you still need any help determining your eligibility for this course, please contact our Admissions Team. | OCR Cambridge Technical Extended Certificate: D | Typical entry criteria will be to achieve AB in two A-Levels* plus a Cambridge Technical Extended Certificate graded Distinction. All applicants taking the Cambridge Technical Extended Certificate in Engineering will be required to have achieved a Distinction in Mathematics for Engineering. Additionally, a Distinction is required in Applied Mathematics for Engineering where applicants have studied this unit. *If you have not taken the A-Level subjects required for first year entry to your chosen course, then you will usually need a Foundation Year. For example, if you want to study BEng Mechanical Engineering, you must not have already studied or be studying A-levels in both maths and physics. If you are studying maths but not physics or if you are studying physics but not maths, then you would normally be eligible to study BEng Mechanical Engineering with Integrated Foundation Year. If you are studying three other subjects e.g. sociology, biology and geography, then you would normally be eligible to study BEng Mechanical Engineering with Integrated Foundation Year. For further information please to refer our webpage, which lists the subject combinations that are not acceptable for entry to our Foundation Year. If you still need any help determining your eligibility for this course, please contact our Admissions Team. | Welsh Baccalaureate - Advanced Skills Challenge Certificate (first teaching September 2015): {'start': ['A'], 'end': ['B']} | ABB from three A levels* or AB from two A levels* and B from the Advanced Welsh Baccalaureate Skills Challenge Certificate or BB from two A levels* and A from the Advanced Welsh Baccalaureate Skills Challenge Certificate. *If you have not taken the A-Level subjects required for first year entry to your chosen course, then you will usually need a Foundation Year. For example, if you want to study BEng Mechanical Engineering, you must not have already studied or be studying A-levels in both maths and physics. If you are studying maths but not physics or if you are studying physics but not maths, then you would normally be eligible to study BEng Mechanical Engineering with Integrated Foundation Year. If you are studying three other subjects (i.e. not maths or physics) e.g. sociology, biology and geography, then you would normally be eligible to study BEng Mechanical Engineering with Integrated Foundation Year. For further information please to refer our webpage, which lists the subject combinations that are not acceptable for entry to our Foundation Year. If you still need any help determining your eligibility for this course, please contact our Admissions Team.
with no component below 6.0
Whichever degree you are aiming for you will take these core modules: Electricity and Electronics, Engineering Principles, Coursework (including computer applications), Mathematics A and B, Mechanical Science, and Routes to Success. Specialist Science and Engineering English language module available.
Please see our website for further details and updates regarding tuition fees. We anticipate that international tuition fee levels for 2027 entry will be confirmed in August 2026. — UG 2027 Entry - Home Confirmed, International TBC
Comparing courses? Match them against your grades.
Open the course explorer